![]() ![]() Note, like the PS4, you can only connect a maximum of 4 controllers using this tool.Īfter you get your controller set up to this point, you’ll need to select and/or create a profile. Your controller’s ID will be different than mine. Once that’s all complete, you’ll see the DS4Windows main window now looks like this and contains your new controller: You’ll see a few notifications pop up regarding installation of various controller drivers for this newly found controller. After this, DS4Windows will ensure the proper drivers are loaded for this controller. It should show up as ‘Wireless Controller’. From here you should see a window like so:Ĭlick on Bluetooth type devices and make sure the controller is in pairing mode. Make sure Bluetooth is enabled on your computer. Once you click on Bluetooth Settings, you should see a window appear like: If you’ve chosen Bluetooth, then change settings by clicking the ‘Bluetooth Settings’ button and connect the controller to Windows through Windows’s control panel settings. If you intend to use the controller wirelessly, then follow the (optional) Bluetooth instructions at the bottom of the window above. If you have a USB cable, then follow the instructions at the top of the red box. Skip this step on Windows 10.įrom here, you’ll need to choose if you’re going to use this controller via USB cable or via Bluetooth. Step 2: Install the 360 driver (only needed if Windows 7 or below). Step 1: Install the DS4 Driver - Click the Button highlighted in red Once you run DS4Windows, you should see a window that looks like this: There’s no way around this issue because this developer has chosen not to code sign this application. Note, Windows may warn you that this application is from an unknown developer, be sure to click ‘Run Anyway’. If you’re running 32 bit Windows, choose the x86 version.Īfter you download it, you’ll extract out the zip file which contains the following files:įrom here, double-click the DS4Windows application icon. If you’re running 64 bit Windows, download the 圆4 version. However, if you’re reading this 6 months from now or later, it will likely have changed. As I write this article, that number is version 1.4.119. ![]() To download the latest version of DS4Windows click through to this link:Ĭhoose the top most release number. If you have previously used a 360 controller or you are using Windows 8 or above, you can skip that installation step. As you’ll note, you’ll need to install the Microsoft 360 Driver if you’ve never used a 360 controller on Windows. This driver works by latching onto the Xbox 360 controller emulation system that’s available as an add-on in Windows 7 or newer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |